How to Connect to a Database and Add/Update/Delete Record
In this tutorial I will explain to you on how to connect to an Access database and allow you to Add/Update/Delete a record.
To fully understand these tutorials please download the source code How to Add/Update/Delete Record using MS Access Database.
This source code is part of the Hotel Reservation System that I am currently working.
At the end of this tutorial you will learn the basic of database programming. I would like, however, to emphasize especially for beginners that one way to learn programming is to know how to debug a program and devote some of your time to reading. Don't be frightened on how short or long an article should be. The important is at the end of the tutorial you will learn something NEW! If you already know the topic, then don’t bother to study this again.
Table of Contents
- Introduction
- Let’s get started
- Database Connection
- Add and Update a Record
- Delete a Record
- Final Thoughts
Introduction
Before I started learning VB.NET one of the topic that I search for in the internet is on how to connect to the database and make some changes to the table. Although there’s a lot of results, but I cannot find one that suit to my needs. Most of the tutorial is using drag and drop features of vb.net editor. Well, this is okay in most cases but what if you’d like to manipulate the data by code? So, I created this tutorial so that beginner programmer will learn from this.
Let’s get started
It is very important that you use your common sense to understand the logic of database programming. There’s a lot of features built-in to Visual Basic Editor that most programmer especially beginner who overlook it. One of the favorite tools I usually used is the DEBUGGER. If you only knew how important a debugger is, then you do not even need to study this tutorial. Why? Because you can jump right away to the source code and start firing the F8 command from your keyboard and analyze every line as you step through the code.
Anyway beginner is a beginner. You need to start from scratch. If you have already downloaded the source code, then open it in the visual basic .net editor by double clicking the “HowtoAddUpdateDeleteRecord.sln”. If you want to know what is the object that runs the first time you start the program (by pressing F5) then double click the “My Project” at the Solution Explorer. Look at the Startup Form.
You will see that the value is “frmCustomersList”. Now, click this object in the Solution Explorer and click the View Code at the toolbar. Look for the Load event similar below:
Private Sub frmCustomersList_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
sSql = "SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address FROM Customers ORDER BY CustomerID ASC"
Call FillList()
FillListView(lvList, GetData(sSql))
End Sub
frmCustomersList_Load is the second procedure that runs when you hit the F5 Key from your keyboard. If you’d like to know how this code is executed then press F8.
Believe it or not F8 is the answer to all your programming question. And I really mean it. When I started programming all I do is to search for free source code and start using the debugging tool. That’s why Visual Basic is being named as Rapid Application Development or RAD.
If you follow the debugger the first line it executes is the Private Sub frmCustomersList_Resize(ByVal sender As Object, ByVal e As System.EventArgs) then followed by frmCustomersList_Load which is actually the important procedure to note here.
Another important debugging tool is “Toggle Breakpoint”. You will be prompted to your code if one of the line is marked by toggle break point. This can be done by pressing the F9 key or clicking the Debug menu then Toggle Breakpoint. This tool is important if the form is already loaded and you want to tract the execution of a code say within a command button.
For example. Open the form frmCustomersList and double click the add button and move the up arrow key once and press F9. You willl have a picture as shown below:
[inline:Toggle Breakpoint.jpg]
Now, when you run the program and click the Add button you will be directed to the code editor window. This case you will see what is happening when you are executing the program. Isn’t it nice?
Database Connection
In order to connect to the database you need a connection string like this:
Public Const cnString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Data Source=../data/sample.mdb"
Then open it by using this command:
Dim cnHotel As OleDbConnection
cnHotel = New OleDbConnection
With cnHotel
If .State = ConnectionState.Open Then .Close()
.ConnectionString = cnString
.Open()
End With
You need this whether you use OleDbDataReader, ExecuteNonQuery or OleDbCommandBuilder to read or write into the database table. To know more about this class just click this command and press F1 key to open the help files. Be sure you installed the MSDN.
Since you have already open the connection to your database this is now the time to fill the ListView with data. This can be done by calling a function like:
FillListView(lvList, GetData(sSql))
The line of code will then execute a function:
'Fill ListView control with data
Public Sub FillListView(ByRef lvList As ListView, ByRef myData As OleDbDataReader)
Dim itmListItem As ListViewItem
Dim strValue As String
Do While myData.Read
itmListItem = New ListViewItem()
strValue = IIf(myData.IsDBNull(0), "", myData.GetValue(0))
itmListItem.Text = strValue
For shtCntr = 1 To myData.FieldCount() - 1
If myData.IsDBNull(shtCntr) Then
itmListItem.SubItems.Add("")
Else
itmListItem.SubItems.Add(myData.GetString(shtCntr))
End If
Next shtCntr
lvList.Items.Add(itmListItem)
Loop
End Sub
Again in order to see how this code is being executed just run the program using the debugging tool (either F8 or F9).
The rest of the procedure is executed only when they are called. For example, the code below is executed only when you click the Add button.
Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
Dim CustomerID As String
frmCustomers.State = gModule.FormState.adStateAddMode
For Each sItem As ListViewItem In lvList.SelectedItems
CustomerID = sItem.Text
Next
frmCustomers.CustomerID = CustomerID
frmCustomers.ShowDialog()
Call FillList()
End Sub
This code will open the form frmCustomers in add mode and will execute also its own Load Event. If you want to open the form frmCustomers in edit mode, then just double click the item in a ListView.
The code being executed are:
Private Sub lvList_DoubleClick(ByVal sender As Object, ByVal e As System.EventArgs) Handles lvList.DoubleClick
Dim CustomerID As String
For Each sItem As ListViewItem In lvList.SelectedItems
CustomerID = sItem.Text
Next
With frmCustomers
.State = gModule.FormState.adStateEditMode
.CustomerID = CustomerID
.ShowDialog()
Call FillList()
End With
frmCustomers = Nothing
End Sub
The two procedure seems carry the same concept, by opening a form, except they vary on the button invoke for execution.
The line
frmCustomers.State = gModule.FormState.adStateAddMode
will tell the target form to open the connection to the database in add mode and
frmCustomers.State = gModule.FormState.adStateEditMode
will open the database in edit mode.
Add and Update a Record
Now, how to save the data in textboxes within the form? This can be done by calling a procedure called btnSave_Click. This procedure is fired when the Save button is clicked.
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
Dim dt As DataTable = dsCustomers.Tables("Customers")
If txtCustomerID.Text = "" Or txtCompanyName.Text = "" Then
MsgBox("Please fill up Customer ID or Company Name information.", MsgBoxStyle.Critical)
Exit Sub
End If
Try
If State = gModule.FormState.adStateAddMode Then
' add a row
Dim newRow As DataRow
newRow = dt.NewRow()
newRow("CustomerID") = txtCustomerID.Text
dt.Rows.Add(newRow)
End If
With dt
.Rows(0)("CustomerID") = txtCustomerID.Text
.Rows(0)("CompanyName") = txtCompanyName.Text
.Rows(0)("ContactName") = IIf(txtContactName.Text = "", System.DBNull.Value, txtContactName.Text)
.Rows(0)("ContactTitle") = IIf(txtContactTitle.Text = "", System.DBNull.Value, txtContactTitle.Text)
.Rows(0)("Address") = IIf(txtAddress.Text = "", System.DBNull.Value, txtAddress.Text)
.Rows(0)("City") = IIf(txtCity.Text = "", System.DBNull.Value, txtCity.Text)
.Rows(0)("Region") = IIf(txtRegion.Text = "", System.DBNull.Value, txtRegion.Text)
.Rows(0)("PostalCode") = IIf(txtPostalCode.Text = "", System.DBNull.Value, txtPostalCode.Text)
.Rows(0)("Country") = IIf(txtCountry.Text = "", System.DBNull.Value, txtCountry.Text)
.Rows(0)("Phone") = IIf(txtPhone.Text = "", System.DBNull.Value, txtPhone.Text)
.Rows(0)("Fax") = IIf(txtFax.Text = "", System.DBNull.Value, txtFax.Text)
daCustomers.Update(dsCustomers, "Customers")
MsgBox("Record successfully saved.", MsgBoxStyle.Information)
End With
Catch ex As OleDbException
MsgBox(ex.ToString)
End Try
End Sub
The code for adding and updating a table is the same except that if you are in add mode you just simply add this command:
If State = gModule.FormState.adStateAddMode Then
' add a row
Dim newRow As DataRow
newRow = dt.NewRow()
newRow("CustomerID") = txtCustomerID.Text
dt.Rows.Add(newRow)
End If
This way you do not need to create a separate command to insert and update a table.
Delete a Record
Let us go back to frmCustomersList form and delete a record. The procedure before will be fired after clicking a Delete button:
Private Sub btnDelete_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDelete.Click
Dim CustomerID As String
For Each sItem As ListViewItem In lvList.SelectedItems
CustomerID = sItem.Text
Next
If CustomerID <> "" Then
'Delete the selected record
Dim strDeleted As Boolean
strDeleted = ExecNonQuery("DELETE Customers.CustomerID FROM Customers WHERE CustomerID= '" & CustomerID & "'")
If strDeleted = "True" Then
MsgBox("Record's deleted.", MsgBoxStyle.Information)
Call FillList()
Else
MsgBox(strDeleted)
End If
Else
MsgBox("Please select record to delete.", MsgBoxStyle.Critical)
End If
End Sub
The important line here is the
strDeleted = ExecNonQuery("DELETE Customers.CustomerID FROM Customers WHERE CustomerID= '" & CustomerID & "'")
which call the function ExecNonQuery and deletes a record based on the SQL Statement.
Final Thoughts
The above tutorial will simply teach you on how to connect to a database and make some changes to the database table.
It is very important that you read first some tutorials about programming before you dive into the source code if you’re just starting out.
If you really wanted to learn faster, then I recommend a book which is my reference also with this article. This book is called Beginning VB 2008 Databases: From Novice to Professional (Beginning: from Novice to Professional). The advantage of this book because it teaches your more specific to database programming.
Comments
re: hi....
You need a picture control in order to insert a picture. Read and download the source code on this post: How to movie records connected to images.
please i need an enrollemnt
please i need an enrollemnt system created using visual basic 6.0 Pls help me
re: please i need an enrollemnt
I don't have the plan to program it in vb 6.0. Use the available resources to be more productive.
deleting record from datagrid
how to view data from flexgrid
hi..
i've some problem to view data from flexgrid..
that mean..my system is reseller sales system
first my system browse data in xls (excel) from document
then from the data that show in flexgrid i want to view in other GUI
can u help me?
re: Error in source code
oledb to sql...
re: oledb to sql...
Connection
I AM NEW FOR VB.NET & shtCntr WHAT IS THIS
How to connect a database and Add/update/Delete Using a sql serv
plz help 4 my projt
payroll system
I have a problem Plzzz help me.
Please explain on the code below:
HELP
double click the item in a ListView
Just double-click on the row
error for updating/inserting values in record
Get image from sql
error on deleting data
hi im new and i want to learn VB
what's the meaning of .state?
Upper Row Connection .
Help for project
Add new comment
- Add new comment
- 212 views